Urine tests Result: 1 working day

Urinalysis with sediment analysis

Urinalysis with sediment microscopy is a routine test that gives valuable information about kidney function and the health of the urinary tract. It is simple and quick and can point to urinary tract infections, kidney disease, diabetes and other metabolic disorders.

Test code BSUESS Preparing for laboratory tests

Some laboratory tests require specific preparation by the patient, concerning diet before sampling and the time of day at which to come to the laboratory for sampling. The patient can be informed about this by their doctor or by the staff of Sante Laboratorije. Many other tests, however, need no prior preparation, and samples do not have to be collected at a particular time or in relation to meals.

For information, contact us on +381 11 27 62 199 | +381 64 65 87 607 or in writing at office@clinica-sante.rs.

Preparation and sampling

Preparation
Guide to preparing for tests
Results available in
1 working day
Where it is done
All laboratories and map

Description

About the test

Urinalysis is a routine, non-invasive laboratory test that gives information about the composition and the physical and chemical properties of urine. Urine is the end product of filtration by the kidneys, through which the body gets rid of water, mineral salts, metabolic products and toxic substances. Analysing urine gives important information about kidney function and the urinary tract, and also about other metabolic and whole-body processes.

Urinalysis has several stages:

  • Physical examination – the appearance of the urine is assessed: colour, clarity, odour and specific gravity.
  • Chemical examination – using rapid methods (dipsticks) or automated analysers, the pH and the presence of protein, glucose, ketones, bilirubin, urobilinogen, haemoglobin, nitrites and other parameters are determined.
  • Microscopic examination of the urine sediment – shows the presence of cells (red cells, white cells, epithelial cells), casts, crystals or bacteria.

This test is widely used for screening in general practice, because it can detect many conditions early: urinary tract infections, kidney disease, diabetes, liver disease or metabolic disorders.

When it is recommended

Urinalysis is widely used in medical practice for screening, diagnosis and monitoring. It is recommended in the following situations:

  • Routine health checks – as part of periodic check-ups or basic test panels.
  • Urinary symptoms – pain or burning when passing urine, cloudy or foul-smelling urine, visible blood in the urine (macroscopic haematuria), a frequent or urgent need to pass urine.
  • Suspected urinary tract infection (cystitis, pyelonephritis) – to detect white cells, nitrites and bacteria.
  • Assessing kidney function, together with other tests (creatinine, urea, urine albumin/creatinine ratio).
  • Chronic conditions – monitoring people with diabetes, high blood pressure, chronic kidney disease or liver disease.
  • Investigating nephrotic and nephritic syndromes – by detecting protein and blood in the urine and other abnormalities.
  • Monitoring treatment – in conditions affecting the kidneys or urinary tract, to follow the course of the disease and the response to treatment.

Preparation

  • Use the first urine of the morning, as it is more concentrated and allows a more reliable assessment.
  • Just before passing urine, wash your hands and genital area thoroughly with soap and water, then dry them with a clean towel or paper towel.
  • Take the urine cup out of its bag and open it just as you start to pass urine. Do not touch the inside of the lid or the cup with your fingers.
  • Pass the first few seconds of urine into the toilet, then hold the cup in place and collect the middle part of the stream in it, and pass the rest into the toilet. Fill the cup to two-thirds.
  • Try to bring the sample to the laboratory within 2 hours and keep it in a cool place until then. If urine stands at room temperature for longer, its components break down and bacteria multiply, so the result is not reliable.
  • Avoid collecting urine just before, during or just after a period, or if you have bleeding haemorrhoids, as blood can affect the results. If the test cannot be postponed, tell the laboratory staff.

Sample

Midstream urine from the first morning void, in a urine cup filled to two-thirds. You can get a sterile urine cup (a lidded cup in a sealed bag) from the laboratory or buy one at a pharmacy. If you also need a urine culture, both tests can be done on the same correctly collected sample in a sterile cup.

For babies and children who are not yet toilet-trained, use a sterile urine collection bag from a pharmacy, following the instructions supplied. Wash and dry the genital area well before attaching the bag. The bag should not stay on for longer than an hour; if no urine has been collected within that time, attach a new bag and throw the old one away. Transfer the contents of the bag into a sterile urine cup and bring it to the laboratory.

Reference values

Normal values vary with the laboratory, age, sex and physiological state, but the urine of a healthy adult generally has the following characteristics:

a) Physical and chemical properties – these guide the diagnosis and point to any further tests needed

  • Colour: pale yellow to straw yellow (due to urobilin). Very dark urine may suggest dehydration or the presence of bilirubin or blood; very pale urine may occur in diabetes or after drinking a lot of fluid.
  • Appearance (clarity): clear. Cloudy urine may indicate white cells, bacteria, protein or crystals.
  • Odour: faint, characteristic. A pungent smell can occur with urinary infections, and a sweetish smell is sometimes linked to uncontrolled diabetes.
  • Specific gravity: 1.005–1.030.

b) Chemical examination

  • Urine pH: 4.5–8.0
  • Protein: absent or traces
  • Glucose: absent
  • Ketones: absent
  • Bilirubin: absent
  • Urobilinogen: within normal limits (up to about 17 µmol/L, i.e. 1.0 mg/dL)
  • Red cells/haemoglobin: absent
  • White cells: absent or 0–5 per microscope field
  • Nitrites: absent

c) Microscopic examination of the sediment

  • Epithelial cells: a few squamous epithelial cells are normal.
  • Red cells: absent or rare. Their persistent presence (microscopic haematuria) should be investigated.
  • White cells: absent or rare. An increased number may suggest infection or inflammation of the urinary tract.
  • Casts: absent. Hyaline, granular, red cell or white cell casts are significant (kidney disease).
  • Crystals: calcium oxalate or uric acid crystals may sometimes be present without significance. Large numbers of crystals may indicate a risk of urinary stones.
  • Bacteria/yeasts: absent. Their presence may suggest an infection or contamination of the sample.

Reference values depend on the method and the laboratory; the values printed on your report apply to your result.

Interpreting the results

Urinalysis results are interpreted in the clinical context, together with other laboratory tests and, where needed, imaging. Some general pointers:

Protein in the urine (proteinuria)

  • May indicate chronic kidney disease, nephrotic syndrome, or kidney damage due to diabetes or high blood pressure.
  • Temporary proteinuria can occur after intense physical exertion, fever or dehydration.

Red cells in the urine (haematuria)

  • May be a sign of urinary stones, urinary tract infections, injury, glomerulonephritis or, less often, kidney or bladder tumours.

White cells and positive nitrites

  • Together they suggest a bacterial urinary tract infection.
  • White cells without bacteria can occur in urinary tuberculosis, non-infectious inflammation or after certain medicines.
  • Positive nitrites indicate Gram-negative bacteria in the urine.

Glucose in the urine (glycosuria)

  • Most often linked to uncontrolled diabetes.
  • Can also occur in pregnancy (glycosuria of pregnancy) or in rare kidney disorders (renal glycosuria).

Ketones in the urine

  • Can occur in diabetic ketoacidosis, prolonged fasting or starvation, and ketogenic diets.

Raised bilirubin and urobilinogen

  • May indicate liver disease (hepatitis, cirrhosis), haemolysis or blocked bile ducts.

Abnormal urine pH

  • Acidic urine can be associated with metabolic acidosis, uncontrolled diabetes or a meat-rich diet.
  • Alkaline urine can result from a vegetarian or vegetable-rich diet, but also from infections with urease-producing bacteria (Proteus).

Abnormal specific gravity

  • High (hypersthenuria) may indicate dehydration, nephrotic syndrome or diabetes.
  • Low (hyposthenuria) occurs in kidney failure or with excessive fluid intake.

Your doctor interprets the result together with your symptoms and other findings.

What can affect the result

  • Sample quality – contamination with genital secretions, menstrual blood, soap, powders or antiseptic solutions can alter the results.
  • Timing – first morning urine is ideal; very dilute urine (after drinking a lot) can reduce the sensitivity of the test.
  • Food and drink – beetroot, carrots, rhubarb or food colourings can change the appearance and colour of urine; coffee and tea can increase the amount of urine passed.
  • Medicines – some antibiotics, vitamins or contrast agents can affect the colour, pH or chemical parameters of urine.
  • Intense physical exertion – can cause temporary protein or blood in the urine.
  • Pregnancy – may be accompanied by mild glycosuria or proteinuria, which need careful interpretation.
  • Storage and transport – a delay in getting the sample to the laboratory allows bacteria to multiply and changes the composition of the urine.

Related tests

  • Urine culture – to identify and count bacteria in urinary tract infections
  • Urine albumin/creatinine ratio (ACR) – for early detection of kidney damage due to diabetes or high blood pressure
  • 24-hour urine protein – to measure exactly how much protein is lost
  • Serum creatinine and urea – to assess kidney function
  • Kidney and urinary tract ultrasound – to detect stones, malformations or blockages

How to order tests online?

Add the tests you want to your cart

Choose the tests you need and add them to your cart. Use the site search to find the tests you want more easily.

Pay online or at the laboratory

Payment method:

  • Online – payment uses 3D-Secure, a secure authentication protocol that minimises the risk of fraud.
  • At the laboratory – order your tests online and pay for them when you come to the laboratory.
Have your samples taken at one of our laboratories

After payment, you will receive an email confirming your order, with details of how to prepare for sampling. From then on, you can go to the Sante laboratory you chose when ordering your tests and have your samples taken.

Learn more
Back to top