Microbiology Sample: swab Result: 2-4 working days

Wound swab - bacteriology and mycology

A wound swab culture for bacteria and fungi isolates and identifies the bacteria and fungi causing infection in pus or discharge taken from a wound. It is recommended for infected wounds with discharge, pain or inflammation and helps the doctor choose the right treatment.

Test code 2023CS30 Preparing for laboratory tests

Some laboratory tests require specific preparation by the patient, concerning diet before sampling and the time of day at which to come to the laboratory for sampling. The patient can be informed about this by their doctor or by the staff of Sante Laboratorije. Many other tests, however, need no prior preparation, and samples do not have to be collected at a particular time or in relation to meals.

For information, contact us on +381 11 27 62 199 | +381 64 65 87 607 or in writing at office@clinica-sante.rs.

Preparation and sampling

Preparation
Guide to preparing for tests
Sample
Swab
Results available in
2-4 working days
Where it is done
All laboratories and map

Description

About the test

For this test, discharge (pus or fluid) from a wound is collected with a sterile swab and placed on special culture media on which bacteria and fungi grow. Any microorganisms that grow are identified, and when a clinically significant bacterium is found, its sensitivity to antibiotics is also tested (antibiogram), which helps the doctor choose effective treatment.

Infection can develop in many kinds of wounds: after surgery or injury, after bites, in burns and in chronic wounds that are slow to heal, such as diabetic foot ulcers, venous leg ulcers or pressure sores (bedsores).

The most common causes of wound infection are the bacteria Staphylococcus aureus (including meticillin-resistant strains – MRSA) and streptococci, followed by enterococci and Gram-negative bacteria such as Pseudomonas aeruginosa, Escherichia coli, Proteus and Klebsiella. Fungi, most often Candida yeasts, can infect wounds, especially in people with diabetes, weakened immunity or after long courses of antibiotics.

The surface of every wound carries bacteria from the skin, so bacterial growth in the sample does not always mean infection. The result is therefore always interpreted together with the appearance of the wound and the symptoms.

When it is recommended

  • signs of wound infection: redness, warmth, swelling, pain, pus or discharge, an unpleasant smell, slow healing or a high temperature;
  • chronic wounds that do not heal (diabetic foot, venous ulcer, pressure sore);
  • infected surgical or traumatic wounds, bites and burns;
  • an infection that does not improve despite antibiotic treatment;
  • suspected fungal infection of a wound, especially in people with diabetes, weakened immunity or after long courses of antibiotics.

Preparation

  • The swab is best taken before starting antibiotic or antifungal treatment, whether it is applied to the wound or taken as tablets. If you are already on such treatment, tell the staff.
  • Do not apply antiseptics, ointments, creams or powders to the wound before the swab is taken.
  • Do not clean the wound yourself before the swab; the staff taking the sample will do this.
  • Tell the staff where the wound is, how it happened and how long you have had it.

Sample

A swab of discharge from the wound, taken by medical staff with a sterile swab: the wound is first gently cleaned with sterile saline, then the swab is taken from the base of the wound or the area with the most discharge and placed in transport medium.

For deep wounds and abscesses, pus drawn with a syringe or a tissue sample taken by a doctor is more reliable.

Reference values

  • Negative result: no pathogenic bacteria or fungi isolated (no growth, or only the usual skin bacteria).
  • Positive result: the isolated microorganism (bacterium or fungus) is named, with an antibiogram for clinically significant bacteria.

Reference values depend on the method and the laboratory; the values printed on your report apply to your result.

Interpreting the results

A negative result means that no infection-causing organisms were isolated from the sample. It does not completely rule out infection, especially if antibiotics or antiseptics were used before the swab, or if the infection is caused by bacteria that do not grow under routine conditions (e.g. anaerobic bacteria in deep wounds).

A positive result shows which microorganisms were isolated. Their significance depends on the type of organism, the amount of growth, the appearance of the wound and the symptoms: several types of bacteria are often found in chronic wounds, and some of them only live on the wound surface without causing infection.

The antibiogram shows which antibiotics the isolated bacterium is sensitive or resistant to and helps the doctor choose targeted treatment. Finding fungi (e.g. Candida) may mean that they only colonise the wound or that they are causing infection – the doctor decides which.

Your doctor interprets the result together with your symptoms and other findings.

What can affect the result

  • antibiotics, antifungals or antiseptics used before the swab (false-negative result);
  • a swab taken from the wound surface without prior cleaning, so the sample contains mostly skin bacteria;
  • a dry wound with little discharge (not enough material);
  • delayed transport or incorrect storage of the sample;
  • anaerobic bacteria, which are not reliably detected by a routine swab.

Related tests

  • Full blood count and C-reactive protein (CRP) – to assess inflammation and the extent of infection;
  • Blood culture – with a high temperature or signs of the infection spreading into the blood;
  • Glucose and HbA1c – for chronic wounds, to detect or monitor diabetes;
  • Tissue or pus culture – for deep and chronic wounds;
  • X-ray or MRI – when bone involvement (osteomyelitis) is suspected.

How to order tests online?

Add the tests you want to your cart

Choose the tests you need and add them to your cart. Use the site search to find the tests you want more easily.

Pay online or at the laboratory

Payment method:

  • Online – payment uses 3D-Secure, a secure authentication protocol that minimises the risk of fraud.
  • At the laboratory – order your tests online and pay for them when you come to the laboratory.
Have your samples taken at one of our laboratories

After payment, you will receive an email confirming your order, with details of how to prepare for sampling. From then on, you can go to the Sante laboratory you chose when ordering your tests and have your samples taken.

Learn more
Back to top