Chloride
Measuring chloride in the blood helps to assess acid–base and fluid and electrolyte balance, giving information about hydration and kidney function. Abnormal values can occur with dehydration, kidney or metabolic disorders and during diuretic treatment. The test is often part of the routine metabolic panel.
Preparation and sampling
- Preparation
- Guide to preparing for tests
- Sample
- Blood
- Results available in
- 1 working day
- Where it is done
- All laboratories and map
Description
About the test
Chloride is a mineral involved in maintaining the body's water balance and acid–base balance. In the body it is present as chloride and belongs to the electrolytes, along with sodium and potassium.
The test measures the concentration of chloride in the blood. Most chloride comes from food, mainly as sodium chloride, that is, salt. The kidneys keep its concentration within normal limits by adjusting how much is excreted in the urine.
Chloride works closely with sodium, potassium and bicarbonate. Chloride values often change in the same direction as sodium, depending on the amount of water and electrolytes in the body. In some situations, changes in chloride relative to bicarbonate may suggest an acid–base disorder.
Chloride is often measured as part of an electrolyte panel or routine metabolic tests. The result is interpreted together with sodium, potassium, bicarbonate, kidney function and, when needed, blood pH and the anion gap. The anion gap is the difference between the sum of the measured cations (positively charged ions) and the sum of the measured anions (negatively charged ions) in the blood, and is used mainly to classify metabolic acidosis.
Abnormal chloride levels do not usually cause specific symptoms. When symptoms occur, they depend mainly on the cause of the imbalance, the changes in the other electrolytes and the severity of the acid–base disorder.
The result does not establish a diagnosis on its own and must be interpreted in the light of hydration, symptoms, known conditions, treatments and other test results.
When it is recommended
- Routine assessment of electrolyte balance and general health.
- Investigating possible dehydration or excess water in the body.
- Assessing fluid losses from vomiting, diarrhoea or heavy sweating.
- Investigating symptoms such as weakness, tiredness, increased thirst, confusion or changes in breathing.
- Assessing and monitoring acid–base disorders, such as metabolic acidosis or alkalosis.
- Completing the assessment of people with kidney, heart, liver or hormonal conditions.
- Investigating abnormal sodium, potassium or bicarbonate values.
- Monitoring treatment with diuretics or other medicines that can affect fluid and electrolyte balance.
- Monitoring patients receiving drips or other intravenous treatment.
- Completing the assessment when electrolyte losses through the kidneys or the gut are suspected.
Preparation
- Fasting is usually not needed for chloride alone. However, blood is usually taken in the morning, between 7 and 10 a.m., after a 12-hour fast and a night's rest, especially when chloride is measured together with other tests. You may drink water in your usual amount while fasting.
- There is no need to change your usual water or salt intake on purpose before the test unless your doctor advises it.
- Tell your doctor about any recent vomiting, diarrhoea, fever, heavy sweating or reduced fluid intake.
- Mention any treatment you take, especially diuretics and medicines that can affect kidney function or acid–base balance. If you take medicines, blood is taken before your morning dose unless your doctor advises otherwise; do not stop any treatment without your doctor's advice.
- Tell the laboratory staff if you have recently had a drip, especially sodium chloride solutions.
- Avoid intense physical exertion for 2 days before the test, and stop taking vitamin supplements the day before.
Sample
Venous blood.
Reference values
Reference values can vary with age and the measurement method. In adults, a commonly used range is approximately:
- 98–107 mmol/L
Different, age-adjusted ranges may be used for children and newborn babies.
Chloride can be reported in mmol/L or mEq/L. Because the chloride ion carries a single electrical charge, the numerical values in the two units are the same.
A value outside the reference range does not on its own establish the cause of the imbalance and must be interpreted together with the other electrolytes and the clinical picture.
Reference values depend on the method and the laboratory; the values printed on your report apply to your result.
Interpreting the results
Chloride should be interpreted together with sodium, potassium, bicarbonate, kidney function and, when needed, blood gases and the anion gap.
High chloride
A chloride level above the reference range is called hyperchloraemia. It can occur when the body loses more water than electrolytes, or when chloride rises relative to bicarbonate. High values can be seen in:
- dehydration due to insufficient fluid intake or large water losses;
- prolonged diarrhoea and other situations in which the body loses bicarbonate;
- hyperchloraemic metabolic acidosis, in which a fall in bicarbonate is accompanied by a rise in chloride;
- renal tubular acidosis and other conditions that alter how the kidneys excrete acids and electrolytes;
- some kidney diseases;
- large amounts of intravenous saline;
- certain medicines that can affect fluid and electrolyte balance;
- rarely, interference with the laboratory method.
High chloride with low bicarbonate may suggest hyperchloraemic metabolic acidosis, but the diagnosis requires a full assessment of the acid–base balance.
Low chloride
A chloride level below the reference range is called hypochloraemia. It can result from chloride loss from the body or from dilution when there is excess water. Low values can be seen in:
- repeated vomiting or prolonged suction of the stomach contents;
- diuretic treatment;
- salt loss through the kidneys;
- heavy sweating;
- metabolic alkalosis;
- excess water or conditions that cause fluid retention;
- heart failure or liver cirrhosis, usually together with other electrolyte changes;
- some hormonal disorders, including adrenal insufficiency;
- some situations associated with low sodium.
Low chloride with high bicarbonate can be seen in metabolic alkalosis, especially with vomiting or diuretic treatment.
Chloride within the reference range
A result within the reference range suggests there is no obvious change in the chloride level at the time of sampling. However, a normal value does not rule out all fluid, electrolyte or acid–base disorders; the relationship with sodium and bicarbonate, the anion gap, kidney function and the clinical picture all matter for interpretation.
Your doctor interprets the result together with your symptoms and other findings.
What can affect the result
- Your hydration status.
- Vomiting, diarrhoea, fever or heavy sweating.
- Drinking very little or too much fluid.
- Kidney function.
- Acid–base disorders.
- Treatment with diuretics, carbonic anhydrase inhibitors or other medicines that affect electrolyte balance.
- Recent drips, especially sodium chloride or bicarbonate solutions.
- Taking the blood from an arm with a drip running, or contamination of the sample with the drip solution.
- Differences between the methods and analysers used by laboratories.
- Rarely, interference from bromides, iodides or toxic levels of salicylates with certain measurement methods.
Related tests
- Sodium – often changes together with chloride and is needed to assess water and electrolyte balance
- Potassium – completes the electrolyte assessment and may change in kidney or acid–base disorders
- Bicarbonate or total carbon dioxide – useful for assessing acid–base balance and interpreting chloride changes
- Anion gap – a value calculated from the electrolytes, used to classify certain forms of metabolic acidosis
- Blood gas analysis – assesses pH, bicarbonate and acid–base disorders
- Urea, creatinine and estimated glomerular filtration rate – useful for assessing kidney function
- Glucose and serum osmolality – may be recommended when investigating hydration disorders or related changes in sodium
- Urine chloride – can help to distinguish the causes of metabolic alkalosis and to assess chloride losses through or outside the kidneys
- Urine sodium and potassium – complete the assessment of electrolyte excretion by the kidneys
- Urine pH and other kidney investigations – may be recommended if renal tubular acidosis is suspected
- Cortisol and ACTH – may be recommended if adrenal insufficiency is suspected
- Assessment by an internal medicine, kidney or hormone specialist – depending on the severity of the imbalance and the suspected cause
Part of a package
Health through prevention Full blood count - 5-part differential + Erythrocyte sedimentation rate + Glucose and 19 more 3.700 RSDFrequently ordered together
How to order tests online?
Choose the tests you need and add them to your cart. Use the site search to find the tests you want more easily.
Payment method:
- Online – payment uses 3D-Secure, a secure authentication protocol that minimises the risk of fraud.
- At the laboratory – order your tests online and pay for them when you come to the laboratory.
After payment, you will receive an email confirming your order, with details of how to prepare for sampling. From then on, you can go to the Sante laboratory you chose when ordering your tests and have your samples taken.